Electronic Truck Scale
Electronic Truck Scales for Heavy-Duty Vehicle Weighing
Our electronic truck scale range includes capacities from 30 tons to 150 tons, with dedicated models for heavy-duty weighing and digital weighing applications. The SCS-120 and SCS-150 models offer platform lengths from 5m to 24m, while our digital electronic truck scale uses 24-bit A/D conversion and RS485 communication.
Weighing Capacity and Platform Specifications
Different truck scale models are available for different vehicle loads and installation requirements.
| Model / Configuration | Maximum Capacity | Platform Width | Platform Length |
|---|---|---|---|
| SCS-120 | 120 tons | 2.5m / 3m / 3.2m / 3.4m | 5m–24m |
| SCS-150 | 150 tons | 3m / 3.2m / 3.4m recommended | 5m–24m |
| Digital Electronic Truck Scale | 30–150 tons applicable range | Model-dependent | Model-dependent |
The SCS-120 uses 6–8 sensors and a reinforced main-beam structure. The SCS-150 is designed for heavier loads, with steel thickness increased by 30% compared with the standard structure.
Digital Weighing System Configuration
Our Digital Electronic Truck Scale uses digital load cells and a dedicated communication protocol.
| Technical Item | Specification |
|---|---|
| Sensor Technology | Digital sensors |
| A/D Conversion | 24-bit |
| Internal Resolution | ≥1,000,000 counts |
| Communication | RS485 bus |
| Fault Diagnosis | Automatic addressing and fault alarm |
| Signal Protection | Digital encryption |
The digital system supports sensor fault identification through the indicator. If a cable connection becomes loose, the system issues a warning. Its series-bus wiring allows the other sensors to continue operating when one sensor fails.
Heavy-Duty Structure and Installation
The SCS-150 uses automatic submerged arc welding and a reinforced platform structure. Its steel thickness is 30% greater than the standard structure.
Both pit and pitless installation methods are described in our truck scale product information. For the SCS-150, pitless installation can usually be completed within two days after the foundation area is ready. Pit installation takes longer because additional civil construction work is required.
We provide foundation drawings and technical guidance. Customers can arrange local concrete construction, while our technicians handle equipment setup.
Available Options and Customization
- SCS-120 platform widths of 2.5m, 3m, 3.2m and 3.4m.
- SCS-120 platform lengths from 5m to 24m.
- SCS-150 recommended platform widths of 3m, 3.2m and 3.4m.
- SCS-150 platform lengths from 5m to 24m.
- An optional explosion-proof version for the SCS-120, supplied with a certified junction box.
- Digital or analog weighing technology, depending on the selected product configuration.
We also provide on-demand customization, site surveys and tailored solution design.
Manufacturing and Project Support
Our production equipment includes bending machines, gas-shielded welding machines, automatic submerged arc welding machines and cutting machines.
For the SCS-150, the stated production time is approximately 15 days. Special steel plates and materials require additional preparation.
Our service covers model selection, site surveys, solution design, installation, commissioning, operator training and after-sales support. We also provide a one-year main-unit warranty for the SCS-120 and SCS-150 models. The digital electronic truck scale also comes with a one-year warranty, long-term spare parts supply and remote technical support.
Request an Electronic Truck Scale Quotation
Send us your required weighing capacity, platform width and length, installation method and order quantity. Our team can review your project requirements and recommend a suitable electronic truck scale configuration.
















