Pitless Weigh Bridge
Port terminals and large logistics hubs process articulated lorries exceeding 18 meters in length. The Pitless Weigh Bridge offers platform lengths of 3×16m to 3×18m with capacities up to 120t. The extended drive-through design accommodates the entire vehicle in one stop. Since no pit is excavated, the scale installs directly on the yard surface, speeding up terminal setup.
Accessing sensors beneath an 18-meter steel platform is challenging. These modular decks feature dedicated jacking points. When a load cell fails, technicians place hydraulic jacks at these points to lift the section slightly. This provides enough clearance to slide out the old sensor and install a new one, eliminating the need for heavy cranes.
When trucks brake abruptly, the platform tends to slide. Mechanical limit brackets on all sides restrain lateral and longitudinal movement, protecting the load cells from shear damage.
The factory uses standard-sized load cells and junction boxes in this Pitless Weigh Bridge, allowing international buyers to source replacements locally. The modular sections are bundled with heavy-duty strapping and reinforced corner guards inside the container, with wood blocks preventing shifting during rough seas.
|
Parameter |
Specification |
|
Max Capacity |
100t / 120t |
|
Division |
50kg |
|
Platform Size |
3×16m / 3×18m |
|
Maintenance |
Reserved jacking points for inspection |
|
Restraint |
Mechanical lateral and longitudinal limits |
Hot Tags: pitless weigh bridge, China pitless weigh bridge manufacturers, suppliers, factory, 100 Ton Weighbridge, above ground truck scale, weighbridge, weighbridge for mining, weighbridge systems, weighbridge ticketing system
Previous
Concrete Deck WeighbridgeNext
No InformationYou Might Also Like
Send Inquiry











